Revo R4-8-16DVR2 User Manual page 78

User's Manual
Sequence Site: Configure the sequence site. Netcon connects to the registered sites sequentially allowing connection
to more than one remote site.
 Sequence dwell time: Adjust sequence intervals (from 5 seconds to 1 hour) for each connection.
 Add: Select the site to add from the Group List and click the Add button.
 Add All: Adds all sites in the Group List to the Auto Sequencing list.
 Remove: Select the site to remove from the Auto Sequencing list and click the Remove button.
 Remove All: Removes all sites in the Auto Sequencing list.
NOTE: The Auto Sequencing list is not valid with modem connections.
Load Setup File
Allows applying the settings of the System – Setup menu saved as a .xml file format to the Netcon system. Loading
the setup file can also be performed by clicking the button on the toolbar.
Save Setup File
Allows saving the current settings of the System – Setup menu as a .xml file format. Saving the setup file can also
be performed by clicking the button on the toolbar.
Batch Job Setup
Multiple remote sites can be upgraded or set up using the Batch Job Setup screen.
Upgrade: Sets up the remote upgrade job for remote sites. First, select the remote sites to upgrade from the Group
List, and add them to the Upgrade Sites list by clicking the Add button. Then, click the Upgrade Now button to initiate
the remote upgrade job for registered Upgrade Sites.
 Add: Select the site to add from the Group List and click the Add button.
 Add All: Adds all sites in the Group List to the Upgrade Sites list.
22