Main Setup - Revo R4-8-16DVR2 User Manual

Table of Contents

MAIN SETUP

The Main Setup screen gives you to access to all the DVR's setup screens. Your DVR can be set up using various screens

and dialog boxes.

Throughout the screens you will see

the opportunity to reset that screen to its default settings. You can save your changes by selecting the Save button and

pressing the

button. Selecting the Cancel button exits the screen without saving the changes.

To enter the Main Setup screen, press the MENU button on the remote control. Select the

of the screen by pressing the

NOTE: Setting up a password is strongly recommended to ensure secure management of the system.

NOTE: To enter a password by using the mouse, click the

instructions above for using the virtual keyboard.

NOTE: Selecting the

NOTE: When the installed hard disk drive is not formatted, a message box appears asking you to format the

hard disk drive. If you want to record video, you must format the hard disk drive.

. Selecting the

button. The password screen appears.

Enter the password by pressing the appropriate combination of Camera number

buttons on the remote control and select the OK button. The following Main Setup

screen appears. There is no default password when logging in for the first time.

icon in the top-right corner allows you to access the Basic Setup wizard.

Select the Finish button to finish the Basic Setup Wizard.

NOTE: Selecting the Go to Network Setup button moves to the

Network Setup directly after finishing this wizard.

and pressing the

button, and a virtual keyboard displays. See

Digital Video Recorder

button on the remote control gives you

(Setup) icon at the top

Table of Contents

Table of Contents