Webguard - Revo R4-8-16DVR2 User Manual

User's Manual

WEBGUARD

WebGuard allows you to access a remote DVR, monitor live video images and search recorded video using Internet
Explorer web browser anytime from virtually anywhere.
Computer system requirements for using the WebGuard program are:
Operating System: Microsoft Windows

CPU: Intel Pentium III (Celeron) 600MHz or faster

 RAM: 128MB or higher
VGA: 8MB or higher (1024x768, 24bpp or higher)

Internet Explorer: Version 6.0 or later

Start Internet Explorer on your local PC. You can run the WebGuard program by entering the following information
in the address field.
"http://IP address:port number" (The DVR IP address and the WebGuard port number (default: 12088) set in the Network
–
setup screen (WebGuard tab))
Or, "http://DVRNS server address/DVR name" (The DVRNS server address and the DVR name registered on the DVRNS
–
server)
Or, "http://www.revodvr.com" (Entering the DVR IP address or the DVR name will be required when logging in)
–
NOTE: You will need to get the appropriate IP address for the DVR you want to connect to and the WebGuard
port number from your network administrator.
NOTE: WebGuard only works with Microsoft Internet Explorer and will NOT work with other browsers.
You will need to enter the DVR IP address in the DVR ADDRESS field when running the WebGuard program by
entering http://www.revodvr.com. Selecting the Use DVRNS option allows you to enter the DVR name registered
on the DVRNS server instead of the IP address. You must enter the DVRNS server address and port number in the
SETUP setting when selecting the Use DVRNS option.
NOTE: The port numbers for WEBWATCH, WEBSEARCH and Audio should be the same port numbers used for
Remote Watch, Remote Search and Remote Audio set during Network setup.
NOTE: When running the updated WebGuard for the first time, Internet Explorer might occasionally load the
information of the previous version. In this case, delete the temporary internet files by selecting Tools  Internet
Options  General tab, and then run WebGuard again.
NOTE: There might be a problem that the bottom of WebGuard page is cropped due to the address or status bars
in Microsoft Internet Explorer 7.0. In this situation, it is recommended that websites open windows without address
or status bars by changing the internet setting. (Go to the Tools  Internet Options  Security tab  Click the
Custom level... button  Select Enable for the Allow websites to open windows without address or status bars option)
NOTE: When running WebGuard in the Microsoft Windows Vista operating system, it is recommended to start
Internet Explorer with elevated administrator permissions. Click the right mouse button on the Internet Explorer
icon and select the Run as administrator option from the context menu. Otherwise, some functions of the WebGuard
might be limited.
36
®
2000, Microsoft Windows
Select between the WEBWATCH (Web monitoring) and WEBSEARCH
(Web search) modes and enter the appropriate port number of the program.
Entering PASSWORD and clicking the [LOGIN] button logs in using
the selected mode.
®
XP or Microsoft Windows
®
Vista