Revo R4-8-16DVR2 User Manual page 23

 Remote Audio Channel: The DVR supports two-way audio communication between a local system and a PC running
Netcon or WebGuard. Select the audio channel that sends audio to the remote site. Selecting Select From Netcon
will send audio of the channel selected from Netcon.
NOTE: Depending on network conditions, audio might be interrupted or out of synchronization during
transmission.
 Enable WebGuard Service: Selecting the box turns the WebGuard service On. Select the port number used when
accessing WebGuard. See Appendix – WebGuard for details.
Network Settings (NETWORK  Network Tab)
NOTE: Ask your network provider for your network connection type and connection information.
NOTE: If the DVR is configured for DHCP or ADSL, the IP address of the DVR might change whenever the unit
is turned on. If you want to use the DVRNS function, you will need to get the IP Address of the DNS Server from
the Internet service provider.
 DNS Server: Set the DNS server IP address obtained from your network administrator. If you set up the DNS Server,
the domain name of the DVRNS server or SMTP server instead of the IP address can be used during DVRNS Server
or Mail setup.
 Port Number Setup...: Set the port number of each remote software related
program.
NOTE: You will need to get the appropriate Port Numbers for each remote
software related program from your network administrator. Do NOT use the
same port number for two different programs, otherwise, the DVR cannot be
connected with the PC running Netcon or WebGuard.
CAUTION: When changing the port settings, you must change the port settings on the PC
running Netcon or WebGuard.
 Type: Select the type of network configuration from:
Manual, DHCP and ADSL (with PPPoE).
Manual – You can select Manual when using a static IP address
for network connection. Set up LAN parameters manually. Set
the numbers of the IP Address, Gateway and Subnet Mask.
DHCP – You can select DHCP when the DVR is networked
through DHCP (Dynamic Host Configuration Protocol). The
DVR reads the IP address from DHCP network when selecting
the Save button.
ADSL – You can select ADSL (with PPPoE) when the DVR
is networked through ADSL. Enter the ID and password for
ADSL connection, and the DVR receives the IP address when
selecting the Save button.
Digital Video Recorder
15