If You Cannot Make Copies as You Want
Problem
Copies are not stapled.
Staples are wrongly posi-
tioned.
Misfeeds occur frequently. Copy paper size setting is
You cannot combine sever-
al functions.
Adjust Image
Problem
In Centre/Border mode,
parts of the original image
are not copied.
Cause
There are jammed staples
in the stapler.
The number of copies ex-
ceeds the capacity of the
stapler.
The stapler has run out of
staple.
Originals are not set cor-
rectly.
not correct.
Selected functions cannot
be used together.
Cause
The margin is too wide.
Your original has narrow
margins on four sides.
If You Cannot Make Copies as You Want
Action
Remove jammed staples.
See ⇒ P.109 " e Removing
Jammed Staples".
Note
After removing jammed
staples or adding sta-
ples, staples might not
be ejected the first few
times you try to use the
stapler.
Check the stapler capacity.
See ⇒ P.38 "Staple".
Add staples. See ⇒ P.107
" d Adding Staples".
Set originals correctly. See
⇒ P.38 "Staple".
Set the proper paper size.
See ⇒ P.103 "Changing the
Paper Size".
Refer to the combination
chart. See ⇒ P.80 "Combi-
nation Chart".
Action
Set a narrower margin with
the user tools. See "01. Bor-
der Erase Width" in ⇒
P.120 "2. Adjust Image
See "02. Centre Erase
Width" in ⇒ P.120 "2. Ad-
1
just Image
/
".
2
3
1
/
".
2
87