Combine; Stamp - Ricoh Aficio 220 Operating Instructions Manual

What to do If Something Goes Wrong
Problem
In Image Repeat mode, the
original image is not cop-
ied repeatedly.
3

Combine

Problem
Parts of the image are not
copied.
Order of copies is not cor-
rect.

Stamp

Problem
Stamps do not appear on
copies.
88
Cause
You selected the same size
copy paper as originals,
and did not select the prop-
er reproduction ratio.
Cause
You specified an improper
reproduction ratio that
does not meet the sizes of
your originals and copy pa-
per.
Your originals are not iden-
tical in size and direction.
You set originals in the in-
correct order.
Cause
The original is not set cor-
rectly.
Action
Select copy paper larger
than the originals. See ⇒
P.72 "Repeat Image—Repeat-
ing an Image over the Entire
Copy".
Select the proper reproduc-
tion ratio. See ⇒ P.72 "Re-
peat Image—Repeating an
Image over the Entire Copy".
Action
When you specify a repro-
duction ratio using Manual
Paper Select mode, make
sure the ratio matches your
originals and the copy pa-
per.
Note
Select the correct repro-
duction ratio before us-
ing Combine mode.
Use originals that are iden-
tical in size and direction.
When setting a stack of
original in the document
feeder, the last page should
be on the bottom.
If you set an original on the
exposure glass, start with
the first page to be copied.
Action
Set original correctly.
See ⇒ P.75 "Preset Stamp—
Printing Preset Messages on
Your Copies".