Menu
02. Centre Erase Width
03. Left Dup. Margin
04. Top Dup. Margin
Description
The default width of erased margins in Centre Erase mode
can be changed as follows:
• Metric version: 3 – 50mm in 1mm steps
• Inch version: 0.1 – 2.0" in 0.1" steps
Note
Default:
• Metric version: 10mm
• Inch version: 0.4"
You can specify left margin on the back side of copies.
• Metric version: 0 – 50mm in 1mm steps
• Inch version: 0 – 2.0" in 0.1" steps
Limitation
The optional duplex unit is required.
Note
Default:
• Metric version: 5mm
• Inch version: 0.2"
You can specify back top margin on the front side of copies.
• Metric version: 0 – 50mm in 1mm steps
• Inch version: 0 – 2.0" in 0.1" steps
Limitation
The optional duplex unit is required.
Note
Default:
• Metric version: 5mm
• Inch version: 0.2"
Settings You Can Change with the User Tools
4
121