Nexgrill 720-0686 User Manual page 7

2. Side Panel Assembly
Use two 1/4-in.×12-mm truss head screw
washers (BB) to connect the bottom of the left side
panel (E) to the bottom panel (A). Make the left side
panel flush with rear of bottom panel and tighten the
screws as shown in Fig. 2.
Repeat steps for the right side panel (F)
3. Back Panel Assembly
Remove the back panel (G) from the carton. Position the
back panel (G) with the flat side facing outward. Attach the
back panel to the bottom panel (A) with two 1/4-in. x 12-mm
truss head screw with locking washers
Use four 1/4-in.×12-mm truss head screw
locking washers (BB)
to the right and left side panels as shown in Fig. 4
with locking
(BB) as shown in Fig. 3
with
to connect the back panel (G)
BB
1/4-in.×12-mm truss head screw with locking
washers (BB) 4 x
A
1/4-in.x12-mm truss head screw with
locking washers (BB) 2 x
1/4-in.x12-mm truss head screw with locking
washers (BB) 4 x
7
Fig. 2
E
A
Fig. 3
G
Fig. 4
BB
G
F
BB