Changing The Batteries - Vello shutterboss version ii User Manual

CHANGING THE BATTERIES

The low battery indicator will blink when
battery power is low. To change batteries:
1: Check that the TIMER ACTIVE and
RELEASE buttons are not active.
2: Turn off the camera and disconnect the
ShutterBoss.
3: Slide open the battery chamber cover on
the back of the ShutterBoss.
4: Remove the batteries.
5: Wait for the display to go out and install
two fresh 1.5V AAA alkaline batteries.
SELF LONG INTV No. BEEP
Low Battery Indicator
16