CONNECT TO THE CAMERA
The ShutterBoss comes in a variety of
models that are compatible with different
cameras. The only difference in ShutterBoss
models is the connector on the end of the
cable. Your ShutterBoss and camera may look
different from those pictured in this guide.
1: Make certain the camera is turned OFF.
2: Make certain the TIMER ACTIVE and
RELEASE indicators are not displayed on
the ShutterBoss.
3: Move the camera's remote cord socket
cover to expose the remote cord jack
and connect the ShutterBoss. (Press the
shutter release button on the ShutterBoss
only after you have turned on the camera.)
Look for this symbol.
Many camera manufacturers
use it to indicate the jack for
connecting remote devices.
6
POWER/RESET INSTRUCTIONS
• Press and hold TIMER START/STOP for
approximately 3 seconds to power the
Shutterboss timer on or off.
• Simultaneously press LOCK and TIMER
START/STOP to clear the current timer
information.
RESET
ON/OFF