Vello shutterboss version ii User Manual page 11

TIMED INTERVALS
The ShutterBoss allows you to control the
amount of time between a series of shots.
Choose an interval that is longer than your
exposure time, from 1 second to 99 hours
59 minutes 59 seconds. If using a flash, be
sure to set an interval that is longer than
your flash recycle time.
1. After connecting the ShutterBoss to
your camera, adjust your camera settings.
Choose your focus mode and set your
exposure.
2. Make certain that the controls on the
ShutterBoss are not locked. If you see the
displayed, press the
until the lock icon disappears.
3. Use the arrow button to set the cursor
beneath INTV. Press the left and right
arrows to move the cursor into place.
4. Press the SET button to change the
Interval setting. Use the left and right arrows
to move between hours, minutes, and
seconds. Use the up and down arrows to
change the time values.
5. Press SET again to accept your selection.
6. Press TIMER START/STOP to begin timer.
/Lock button
11
Cursor
SELF LONG INTV No. BEEP
Hours Minutes Seconds