TEC MA-1450-1 Series Owner's Manual page 92

5. READ (X) AND RESET (Z) REPORTS
GT Reports -- to be taken on weekly or monthly basis --
Report Name
(The Mode Lock position is the same as the corresponding Daily report.
However, always add 200 to the numeric value for the report taking.)
FINANCIAL GT READ AND RESET
• Financial GT Read
• Financial GT Reset
CASHIER GT READ AND RESET
• All Cashier GT Read
• All Cashier GT Reset
• Individual Cashier GT Read
• Individual Cashier GT Reset
CREDIT CARD COMPANY SALES GT READ
AND RESET
• Credit Card Company Sales GT Read
• Credit Card Company Sales GT Reset
DEPARTMENT GROUP GT READ
DEPARTMENT GT READ AND RESET
• Individual Department GT Read
• All Department GT Read
• All Department GT Reset
PLU READ AND RESET
• Individual PLU GT Read
• Zone PLU GT Read
• Zone PLU GT Reset
• All PLU GT Read
• All PLU GT Reset
• Inactive PLU GT Read
PLU GROUP SALES GT READ AND RESET
• PLU Group Sales GT Read
• PLU Group Sales GT Reset
Mode Key Operation
Lock
X
203 [AT/TL] (Drawer opens.)
Z
X
204 [AT/TL] (Drawer opens.)
Z
Code Entry Method:
X
Z 204 [#] |Cashier ID Code| [AT/TL]
(2-digit manager-assign code)
Cashier Key Method:
Set the required Cashier Key (or
depress the required Cashier Key),
then 204 [#] [AT/TL]
X
206 [AT/TL]
Z
X 208 [AT/TL]
X 211 [#], then depress the required Dept.
Keys (or use [DP#] key), one by one,
[ST] may be used to obtain subtotal,
[AT/TL] to end.
X
211 [AT/TL]
Z
X 213 [#] |PLU Code| [PLU] ([ST])
* (May be replaced by
[PLU Preset-code Key])
X 213 [#] Zone-start [@/FOR] Zone-end [AT/TL]
Z PLU Code
X
213 [AT/TL]
Z
X 213 [#] 0 [AT/TL]
X
224 [AT/TL]
Z
5-3
5. READ (X) AND RESET (Z) REPORTS
*
Repeatable
[AT/TL]
PLU Code |
EO1-11095
SAMPLE
PAGE
5-16
5-16
5-16
5-16
5-16
5-16
5-16