Function Key Entry; Validation Print - TEC MA-1450-1 Series Owner's Manual

10. REGISTERING PROCEDURE AND PRINT FORMAT

10.52 FUNCTION KEY ENTRY

This operation will execute a string of key operations preprogrammed on each [FUNCTION] key.
OPERATION
- - -
[FUNCTION] (
[FUNCTION 1] to [FUNCTION 10]
• The following key operations are preprogrammed on
the [FUNCTION 1] key in this example.
[1] [00] [DP1] [ST] [AT/TL]

10.53 VALIDATION PRINT

OPERATION
After entering the required
item through a transaction
key or media key (NOTE 1)
NOTES: 1. If the "SLIP" lamp flickers during
registrations, it indicates that the last
item just entered is programmed to
require validation print. In this case, no
other operations can follow until the
validation print of the item is first
executed.
2. Because printing occurs on the front
side of the slip, please be certain to
insert the slip into the validation with the
printing side frontward.
3. No other operations can follow until the
validation slip once printed is withdrawn.
4. The following are programmable
selections relating to validation:
(1) PRINT FORMAT
a) Date Print/Non-print
b) Consecutive No. Print/Non-print
c) Cashier No. Print/Non-print
(2) MULTI-or SINGLE-VALIDATION
(Number of times of validation print
allowed for the same item)
(3) VALIDATION COMPULSORY status
on Media Keys and other transaction
keys.
- - -
)
Insert a validation slip into
the validation slot. Make
sure that the "SLIP" lamp is
steadily lit. (NOTE 2)
Validation Slot
10-32
EO1-11095
10.52 FUNCTION KEY ENTRY
-- Receipt Print Format --
TEC STORE
1343 PEACH DRIVE
PHONE : 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
12-19-1994 MON #3001
VEGETABLE $1,00TF
SUBTL $1,00TF
TAX $0,21
CASH $1,06
ITEM 1
JONES 0207 18:07TM
[VALIDATE]
Validation Slip