Salesperson Code And Name Programming (Submode 20) - TEC MA-1450-1 Series Owner's Manual

6. PROGRAMMING OPERATIONS
6.14

SALESPERSON CODE AND NAME PROGRAMMING (Submode 20)

By programming Salesperson Codes here, those codes may be used in sales entries. In addition, the name of
each salespersons can be programmed in maximum 12 characters.
Programming
CONDITION Any time outside a sale
OPERATION Mode Lock: SET
20 [@/FOR]
Repeat for other salespersons.
NOTES: 1. A maximum of 12 regular-sized or 6 double-sized characters may be programmed for a name. A
combination of both types is also available.
2. Even if no name is programmed (i.e. skipping the Character Entries before the second [ST] key)
for a Salesperson Code, that code can be used in sale entries. Then, auto-preset ID symbol "S P
xx" (xx = Salesperson Code) will be printed instead of a name on a receipt, etc.
ex.) To program the following Salesperson Codes and names:
CODE
1
2
3
|Salesperson Code| [ST]
1 to 99
NAME
White
Stacy
Jansen
6.14 SALESPERSON CODE AND NAME PROGRAMMING (Submode 20)
Character Entries
*
See NOTE 1 below.
* For sequentially programming codes, the
code number specification can be skipped.
Mode Lock: SET
20 [@/FOR].
1 [ST] (Salesperson Code 1)
507 [#] (W)
608 [#] (h)
609 [#] (i)
704 [#] (t)
605 [#] (e) [ST]
2 [ST] (Salesperson Code 2)
503 [#] (S)
704 [#] (t)
601 [#] (a)
603 [#] (c)
709 [#] (y) [ST]
3 [ST] (Salesperson Code 3)
410 [#] (J)
601 [#] (a)
614 [#] (n)
703 [#] (s)
605 [#] (e)
614 [#] (n) [ST]
[AT/TL]
6-27
EO1-11095
[ST] [AT/TL]
TEC STORE
1343 PEACH DRIVE
PHONE : 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
12-19-1994 MON #3001
P20
01 White
02 Stacy
03 Jansen
0047