Basic Position Of The Machine Drive Unit (Only On Machines With Quick Motor) - Pfaff 1122-G-720/02 Instruction Manual

8 Basic position of the machine drive unit
.02.02
Switch on the machine.
2 x
Press the TE/speed key twice to select the input mode.
Select parameter "798" by pressing the corresponding +/- key, and select service level C,
see Chapter 12.08.01 Selecting the user level in the adjustment manual.
Select parameter "799" by pressing the corresponding +/- key (selecting the machine
class).
By pressing the corresponding +/- key, set the value for the parameter at "1".
By pressing the corresponding +/- key, select parameter "700".
Sew one stitch by operating the pedal.
Turn the balance wheel in the sewing direction until the needle point is level with the top
edge of the needle plate.
Conclude the sewing motor adjustment by pressing the TE/speed key.
Installation and commissioning
TE
100 on
TE
798 11
C
TE
799 1
C
TE
700 0
B
(only on machines with Quick motor)
8 - 8