Basic Setting Of The Machine Drive Unit (Only On Machines With Quick-Flange Motor) - Pfaff 918 Instruction Manual

Installation and commissioning
8 Basic setting of the machine drive unit
.07
2 x
8 - 6
Switch on the machine.
3 3
A B
Press TE/Speed key twice to call up the input mode.
TE
101 on
A
By pressing the corresponding +/- key, call up parameter "798" and select service level
"C", see Chapter 12.08.01 Selecting the user level
TE
798
By pressing the corresponding +/- key, call up parameter "800" (rotation direction of the
motor).
By pressing the corresponding +/- key enter the value "1".
TE
800
By pressing the corresponding +/- key select parameter "700".
(only on machines with Quick-flange motor)
3 3
C D
11
C
1
C