Installation and commissioning
8
Mounting the thread retainers
.01.02
8
Assembling the reel stand
.01.03
8
Fitting the sewing lampt
.01.04
8 - 2
1
3
Fig. 8 - 02
Fig. 8 - 03
Screw the sewing lamp onto the table top (wood screws 5 x 35) and have it connected by
a mechanic.
The sewing lamp is available as an option.
2
4
Screw the thread retainers 1 and 2 into
the tapped holes on the top side of the
machine and fix them with nuts 3 and 4.
When mounting the thread
retainers care must be taken
to see that the thread retainer
with the weak spring
(recognizable from the engraving
91-141 873-91 on the top side) is
mounted in position .
Assemble the reel stand as shown in
Fig. 8-03.
Afterwards insert the stand in the hole in
the table top and secure it with the nuts
provided.