Table of Contents
Advertisement
CORRECTIVE MAINTENANCE
If the battery condition metre does not light up when you turn on the power:
n
Check the harness connections. Make sure they are tight.
n
Check the circuit breaker. Reset it if necessary.
n
Check the battery connections.
If the above conditions prove normal, you can load test the batteries with a battery load tester. These testers are available at
automotive parts stores. Disconnect both batteries before load testing, and follow the directions that came with the load tester.
If either one of the batteries fails the load test, replace both of them. If your Quantum Dynamo ATS still does not power up,
contact your authorised Pride Dealer.
WHEN TO SEE YOUR AUTHORISED PRIDE DEALER FOR SERVICE
The following symptoms could indicate a serious problem with your Quantum Dynamo ATS. If necessary, contact an authorised
Pride Dealer. When calling, have the model number, serial number, nature of the problem, and the trouble code if available.
n
Motor noise
n
Frayed harnesses
n
Cracked or broken connectors
n
Uneven wear on any of the tyres
n
Jerky motion
n
Pulling to one side
n
Bent or broken wheel assemblies
n
Does not power up
n
Powers up, but does not move
Quantum Dynamo ATS RevB/Jun04
www.pridemobility.com
CARE AND MAINTENANCE
31
Advertisement
Table of Contents
