9
Removing/inserting the bobbin case
.03
Fig. 9 - 03
9
Threading the bobbin case / Adjusting the bobbin thread tension
.04
Fig. 9 - 04
1
2
+
2
-
1
Turn the machine off!
Danger of injury if the machine
is started accidentally!
Removing the bobbin case:
● Open the post cap.
● Raise latch 1 and remove bobbin case 2.
Inserting the bobbin case:
● Insert bobbin case 2.
● Close the latch and close the post cap.
● Insert the bobbin into the bobbin case 1.
● Pass the thread through the slot under
the spring.
● Pass the thread through the notch.
● Adjust the thread tension by turning
screw 2.
When the thread is pulled, the
bobbin must rotate in the
direction of the arrow.
Preparation
9 - 3