Replacing The Status-Light Board; Procedure; Post-Requisites - Dell Inspiron 15-7559 Service Manual

Replacing the status-light
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Place the status-light board in the slot on the computer base.
2 Slide the status-light board cable into the connector on the status light
board and close the latch to secure the cable.

Post-requisites

1 Follow the procedure from step 2 to step 6 in
2 Replace the keyboard.
3 Follow the procedure from step 4 to step 6 in
4 Replace the battery.
5 Replace the base
52
computer. After working inside your
cover.
After working inside your
"Replacing the palm
"Replacing the hard
rest".
drive".