Table of Contents
Advertisement
•
The outboard has three gear shift positions to provide
operation. Forward (F), Neutral (N) and Reverse (R).
•
When shifting, always stop at neutral position and allow the
engine speed to return to idle.
•
Advance the control lever to further increase speed.
Stopping The Engine
IMPORTANT: Turning key to the "START" position while the
engine is running will result in engine shut down, while leaving the
DTS system active. This will allow the use of the power trim/tilt from
the remote control handle.
Reduce engine speed and shift outboard to neutral position. Turn
ignition key to "OFF" position.
OPERATION
N
F
96
R
3417
3482
Hide quick links:
Advertisement
Table of Contents
