Dual Handle Console Control With Can Trackpad Features And Operation - Mercury 135 Verado Manual

Dual Handle Console Control with CAN Trackpad
Features and Operation
1. Operation of shift and throttle is controlled by the movement
of the control handle. Push the control handle forward from
neutral to the first detent for forward gear. Continue pushing
the handle forward to increase speed. Pull the control handle
back from neutral to the first detent for reverse gear. Continue
pulling the handle back to increase speed.
2. Trim switch (if equipped) - Pressing the trim switch allows the
engine to trim up and down.
3. Neutral lights - The neutral lights illuminate when the engine
is in neutral gear position. The lights will flash when the engine
is in throttle only mode.
NOTE: Gear position is determined by the position of the shift
actuator on the engine, not the position of the control handle.
FEATURES AND CONTROLS
F
N
R
3417
22132
56