Table of Contents
Advertisement
Mounting and commissioning the machine
8
Mounting and commissioning the machine
Mounting
8.01
The necessary electricity supply must be available at the machine's location.
There must be a stable and horizontal surface and adequate lighting at the
machine's location.
8
Adjusting the table-top height
.01.01
8 - 1
The machine must only be mounted and commissioned by qualified personnel!
All relevant safety regulations are to be observed!
If the machine is delivered without a table, it must be ensured that the frame
and the table top which you intend to use can hold the weight of the machine
and the motor, even while sewing.
Due to reasons of packaging, the table top is lowered for transport.
The following is a description of how to adjust the height of the table top.
1
Fig. 8 - 01
Loosen screws 1 and 2 and set the desired table-top height
Tighten screws 1 well.
Adjust the position of the pedal so that you can operate it comfortably and
tighten screw 2.
2
2
1
Advertisement
Table of Contents
