Setting Up; Entering The Puller Feed Stroke (Stitch Length); Setting The Puller Pressure - Pfaff Series 580 Supplement To The Instruction Manual

Setting up

4 Setting up
4 Entering the puller feed stroke
.01
● Switch on the machine.
● Enter the feed stroke by pressing the corresponding +/- key.
4

Setting the puller pressure

.02
● Switch on the machine.
● Set the desired puller pressure by pressing the corresponding +/- key.
10
4000 PUL 30%
The puller feed stroke setting must match the stitch length setting of the basic
machine!
4000 PUL 30%
The value for the current puller pressure (in %) can be read on the display.
(stitch length)
2.0mm
2.0mm