Table of Contents
Advertisement
Sewing
10
Sewing
In the sewing mode all relevant settings for the sewing operation are displayed. Functions
can be switched on or off by pressing a key. Values for start and end backtacks or stitch
placement can be changed directly.
In this mode a difference is made between manual sewing and programmed sewing. To
change from manual to programmed sewing, press the PM key. In programmed sewing the
text „PM" appears on the display. Under the program numbers 1 – 2 seam programs are
stored, which can each altered, see Chapter 10.03 Altering seam programs.
10
Manual sewing
.01
After the machine has been switched on (Chapter 7.01 Main switch) and the manual
sewing mode has been selected with the PM key, the display appears for entering the stitch
length, also see Chapter 9.06 Entering the stitch length.
If the backtack function is switched on, the display appears for entering the backtack values,
also see Chapter 9.07 Entering the start and end backtacks.
It is possible to switch from one display to the other by pressing the scroll key.
Sewing is carried out with the pedal functions, see Chapter 7.02 Pedal.
10 - 1
2.5
A
B
3
3
Further functions in manual sewing, also see Chapter 7.05.02 Function keys:
Start backtacks on/off
End backtacks on/off
Needle position raised on/off
2.5
C
D
3
3
Feed band raised on/off
Feed band raised at end of seam on/off
Thread trimming on/off
Advertisement
Table of Contents
