V I I I . B A S I C T R O U B L E S H O O T I N G
What if the motor runs but my scooter does not move?
With the key turned to the "on" position, check the status LED. If the LED flashes three times, pauses
briefly, then flashes two times, this is the manual freewheel lever code meaning your scooter is in
When the manual freewheel lever is pulled up, the brakes are disengaged and all power to the transaxle
Push down the manual freewheel lever to restore normal operation to your scooter. See III. "Your
What if the main circuit breaker repeatedly trips?
Charge the scooter's batteries more frequently. See IV. "Batteries and Charging."
If the problem continues, have both of your scooter's batteries load tested by your authorised Pride
You may also perform the load test yourself. Battery load testers are available at most automotive parts stores.
Follow the directions supplied with the load tester.
See IV. "Batteries and Charging" for information about your scooter's battery type.
What if the battery condition meter dips way down and the motor surges or hesitates when I press
my scooter's throttle control lever?
Fully charge your scooter's batteries. See IV. "Batteries and Charging."
Have your authorised Pride Dealer load test each battery.
Or, see the previous troubleshooting question for load testing the batteries yourself.
If you experience any problems with your scooter that you are not able to solve, immediately contact your
authorised Pride Dealer for information, maintenance and service.