UTStarcom cdm7025US Manual page 67

3.
Select "Train Words" or "Train Digits". You will be prompted to
speak the words listed on the screen. Say each word as you are
prompted.
4.
Press [Stop] to stop train voice.
PROMPTS
The prompts settings, "Mode" and "Timeout", will allow you to set
how you are notified by the voice command system, the duration in
which you can respond, and how fast the System will play the prompts
to you, when in Prompts or Readout mode.
1.
Press [Menu], then press
Press "VR Settings".
2.
Press "Prompts".
3.
Select "Mode" or "Timeout".
• Mode: Select "Prompt" or "Tones Only".
• Timeout: Select "5 sec" or "10 sec".
4.
Press [Done] to save it.
SETTINGS
"SETTINGS".
67