Stopwatch; Convert Unit - UTStarcom cdm7025US Manual

TOOLS

STOPWATCH

Simultaneously times up to ten different events. To operate the
stopwatch:
1.
Press [Menu], then press
Press
2.
To measure a time period:
• To start, press
• To stop a time period and continue measuring another one, press
• To stop the second and continue measuring a third one, press
• To measure up to ten time periods, repeat the above steps.
• To stop the stop watch, press
• To review the results, press
• To reset it, press

CONVERT UNIT

To access the conversion tool:
1.
Press [Menu], then press
Press
2.
Select the desired type of measurement, and then press
• Length/Weight/Volume/Area/Temperature/Speed
3.
To change the unit type (for example: m, cm), press
and use the keypad to enter the unit to convert. If you need to
change the lower unit of measure (the unit you are converting into),
press to highlight that area.
84
"Stopwatch".
[Start].
[Stop].
/
[Reset].
"Convert Unit".
for the "TOOLS" menu.
.
for the "TOOLS" menu.
[Check].
[Check].
.
/