Table of Contents
Advertisement
Propane Conversion
If the unit is to be used on propane convert as
follows using the components supplied with this
fi replace:
WARNING
This conversion kit shall be installed
by a qualifi ed service agency in
accordance with the manufacturer's
instructions and all applicable codes
and requirements of the authority having
jurisdiction. If the information in these
instructions is not followed exactly, a
fi re, explosion or production of carbon
monoxide may result causing property
damage, personal injury or loss of
life. The qualifi ed service agency is
responsible for the proper installation
of this kit. The installation is not proper
and complete until the operation of
the converted appliance is checked
as specifi ed in the manufacturer's
instructions supplied with the kit.
The gas supply and electrical power shall be shut
off before proceeding with the conversion.
Note: Factory supplied components must be used to
ensure correct input.
After conversion confi rm proper manifold pressure.
1) Ensure the burner, pilot and gas supply are turned off,
and the appliance has cooled.
2) Using a 1/2" wrench, undo the natural gas burner orifi ce,
(marked #30). (Fig. #18)
3) Apply a small amount of pipe joint compound to the threads
of the propane burner orifi ce (marked #45) to ensure a
good seal, before screwing it into the fi tting.
4) Open primary air shutter fully.
TC36.NG03.C 010408-16
CAUTION
Fig. # 18
5) With a 7/16" wrench loosen the pilot head on the pilot
assembly (Fig. #19)
Fig. # 19
9
Advertisement
Table of Contents
