Package Contents
NOTE: MUST BE USED WITH PORCELAIN PANEL SET PART# TC36.PNLPBKB
Burner Installation
Fig. # 1
A porcelain panel set must be used in conjunction with
the installation of the burner assembly. See Installation
and Operating Instructions manual for details.
1) Remove 2 screws from the air channel and attach the lower
rear panel to the fi rebox with these screws. (Fig. # 1)
NOTE: The burner shield may need to be loosened and
re-tightned after positioning if the panel does not slip in
behind it.
2
•
BURNER TUBE
•
MEDIA SPACER, Rear
•
BURNER TRAY ASSY
•
MEDIA SPACER, Front
•
5 lbs. TUMBLED GLASS
•
MEDIA SPACER, Center
•
BURNER SHIELD
•
PANEL, LOWER REAR
•
MANIFOLD ASSEMBLY
(including supply tube)
•
PILOT SHIELD
(including pilot and supply tube)
•
HARDWARE PACKAGE
TC36.NG03.C 010408-16