Page 1
TC42 BLACK DIAMOND BURNER KIT TC42.NG03 PACKAGE CONTENTS: NOTE: MUST BE USED WITH PORCELAIN PANELS #TC42.PNLPBKB • BURNER PART# TC42.5011832 • PILOT BRACKET PART# 9626 • BURNER TRAY ASSY PART# TC42.9641 • HARDWARE PKG PART# TC36.HK03 • TUMBLED GLASS PART# 5012.01 •...
Page 2
Operating Instructions manual for details. “Porcelain Panels Installation Manual”) 4) Floor panels do not require installation as a burner shield is provided with the Black Diamond kit. Fig. # 3 INLET BOX Fig. # 1 REPOSITION MANIFOLD INSERT CONTROL ASSEMBLY TC42.NG03 110505-8...
Page 4
8) Rear and front media spacers are now installed. (Figs #11 & 12) Fig. # 8 PILOT SHIELD ATTACHMENT Fig. # 11 BURNER TRAY PLACEMENT REAR MEDIA SPACER Fig. # 9 Fig. # 12 PILOT ATTACHMENT FRONT MEDIA SPACER TC42.NG03 110505-8...
NOTE: Too much tumbled glass over the burner will cause sooting with the use of propane gas CENTER MEDIA SPACER Fig. # 13a Fig. # 15 BURNER INSTALLATION LOWER REAR PANEL Fig. # 13b Fig. # 16 BURNER INSTALLATION TUMBLED GLASS PLACEMENT 110505-8 TC42.NG03 5...
The fl ame should be just orange and “lazy”. It should NEVER 4) Rotate the shutter to increase or decrease the amount of be set to create sooting on internal parts and glass. primary air. Fig. # 17 TC42.NG03 110505-8...