T&C TC36.NG03.C. Instruction Manual page 4

5) Remove panel retaining clips from the upper heat shield.
Install right side panel by placing the bottom into the fi rebox
and tipping the top into position. (Fig. # 5)
6) Position upper rear panel on top of lower rear panel and
slip in behind the right panel. (Fig. # 6)
7) While supporting the upper rear panel install the left side
panel in the same manner as the right side panel. Secure
both side panels with the previously removed panel
retaining clips. (Fig. # 7)
Fig. # 5
Fig. # 6
Fig. # 7
4
TC36.NG03.C 010408-16