Propane Conversion - T&C TC30 Installation Instructions Manual

Tc30 chalet ii burner kit
Hide thumbs Also See for TC30:
Table of Contents

Advertisement

WARNING
This conversion kit
shall be installed by a
qualifi ed service agency
in accordance with the
manufacturer's instructions
and all applicable codes
and requirements of
the authority having
jurisdiction.
If the information in these
instructions is not followed
exactly, a fi re, explosion
or production of carbon
monoxide may result
causing property damage,
personal injury or loss of
life.
The qualifi ed service
agency is responsible for
the proper installation of
this kit.
The installation is not
proper and complete
until the operation of the
converted appliance is
checked as specifi ed in the
manufacturer's instructions
supplied with the kit.
If the unit is to be used on propane
convert as follows using the
components supplied with this
burner:
CAUTION
The gas supply and electrical power
shall be shut off before proceeding
with the conversion.
TC30.NG06C 200411-16

Propane Conversion

For use with model:
Pour utilise avec du modèle:
Date: ______________________
By / Par: ___________________
This appliance was converted
LP GAS/
to PROPANE GAS with this kit
on this date by the organiza-
DU GAZ LP
tion which accepts the respon-
sibility that this conversion
12.5 in/wc /12.5 po/c.e.
has been properly made. / Cet
(3.11 kPa)
appariel etair converter au gaz
13.9 in/wc / 13.9 po/c.e.
LP par l'emploi de la trousse
(3.45 kPa)
de conversion par une organi-
11.0 in/wc / 11.0 po/c.e.
zation qui accepte la responsi-
(.95 kPa)
bilité pour une installation en
bon état.
# 48
(1.93 mm)
Max.: 35,000 (10.3)
Min.:
27,000 (7.91)
080411
CONVERSION LABEL (5052.52085)
Note: Factory supplied components must be
used to ensure correct input.
After conversion confi rm proper manifold
pressure.
1.
Ensure the burner, pilot and gas
supply are turned off, and the
appliance has cooled.
2.
Remove the two screws securing the
the burner grate.
(Fig. #14)
3.
Remove the two screws securing the
manifold assembly to the burner.
(Fig. #15)
4.
Remove the manifold assembly from the
burner. (Fig. #16)
9
TC30
MINIMUM RATE SCREW (5005.011)
Series C
6-TC30
5052.52085
Fig #14
Fig #15
Fig #16
MAIN BURNER
(#48) ORIFICE (5021.3407)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tc30.ng06c

Table of Contents