Contents of Package
BURNER ASSEMBLY
EMBER MATERIAL
7 PCS LOG SET
HARDWARE PACKAGE
LOG GRATE
If this fi replace is to be
used on Propane please
convert prior to installtion.
See pages 9 – 11.
Burner Installation
1.
Place the keyhole slots in the burner
over the two screws located in the fi rebox
base. (Fig. #1 & 1a)
2. Slide the burner back to engage the
screws in the small part of the keyhole
slot and tighten screws. (Fig. #1b)
3. Remove access cover from side of
fi rebox(Fig. #1c)
Fig. # 1
SCREWS
Fig. # 1c
2
Fig. # 1a
Fig. # 1b
TC30.NG06C 200411-16