HP procurve 8000M User Manual page 7

New Features for Software Release C.07.XX for the HP ProCurve Switch 1600M,
2424M, 4000M, and 8000M
Configuring and Monitoring Port Security
Authorized IP Managers for Enhanced Security
Class of Service (CoS) for Managing Bandwidth More Effectively
SHOW and SET Commands Available Through the Switch's Command Prompt
For descriptions of the security and CoS features, see the Software Update C.7.XX Release Notes for
the HP ProCurve Switch 1600M, 2424M, 4000M, and 8000M, shipped with your switch and also
available in the Support area of the ProCurve website (http://www.hp.com/go/procurve).
The SHOW and SET commands available in release C.07.XX include the following:
SHOW Commands
show bridge [ port_name ]
show filters
show ip
show module
show port counters [ port_name ]
show port spantree
show port status
show snmp
show spantree
show system
[ ] = Optional Parameter; < > = Required Parameter
Set Commands
set abc disable [ vlan_name ]
set abc enable [ vlan_name ]
set igmp disable [ vlan_name ]
set igmp enable [ vlan_name ]
set port disable < port_name >
set port enable < port_name >
set spantree disable
set spantree enable
set spantree fwddelay < delay >
set spantree hello < interval >
set spantree maxage < agingtime >
set spantree portcost < port_name > < cost >
set spantree portpri < port_name > < priority >
set system contact [ contact string ]
set system location [ location string ]
set system name [ name string ]
7