Pitney Bowes DL100 Operator's Manual page 9

Maintaining the DL100 or DL200
Cleaning the Waste Area
Remove paper strips from the waste area after opening a stack of
envelopes, as a large accumulation of paper strips can interfere with
proper operation of the letter opener.
Cleaning the Sensors
Wipe the feed sensor and exit sensor windows with a damp cloth on a
regular basis.
Feed Sensor
Removing the Pressure Paddle
If necessary, the pressure paddle
can be removed.
1. Lift the pressure paddle into
the vertical position.
2. Gently pull the paddle to
remove it from the pressure
paddle shaft on the feeder
wall.
To reattach the pressure paddle,
hold the paddle in the vertical
position. Slide the paddle back
on to the pressure paddle shaft
until it is seated firmly in place.
← Back to Main
Exit Sensor
(DL200 only)
1
2