Pitney Bowes DL100 Operator's Manual page 8

Opening Envelopes
Follow the steps below to set up and open envelopes.
1. Turn the cut depth adjustment knob to the desired setting: to cut a thin piece, cut a thick piece, or count pieces (DL200 only).
IMPORTANT: Select this option carefully, to avoid cutting the contents of the envelope.
2. Tap envelopes so that contents fall away from the side of the envelope
to be opened.
IMPORTANT: Make sure that coins, staples, paper clips, or other objects that
may damage the knives of the letter opener are tapped away from the edge of
the envelope to be opened.
3. If envelopes are the same size, align the right and bottom edges.
• Envelopes of different sizes and shapes can be fed without sorting,
but you may find it more efficient to open batches of envelopes of
the same size.
• Heavy or bulky envelopes may interfere with smooth operation; feed
these separately.
4. Lift the pressure paddle.
5. Place the envelopes on the feed deck so the sides to be opened are
against the feeder wall.
6. Return the pressure paddle to its original position. The feeder will
automatically open and stack the envelopes on the stacker tray.
IMPORTANT: Do not turn the cut depth adjustment knob while the letter
opener is processing envelopes.
7. If the stack runs out and you want to open additional envelopes, follow
steps 1-6.
8. Press the power button when done.
2 Tap the envelopes.
Enterprise Company
123 Main Street
Anywhere, XX 12345
Jane Doe
321 East Main Street
Somewhere, XX 54321
Align the bottom and right edges.
3
Feeder Wall
← Back to Main