Ikelite 6950.52 Instruction Manual page 11

STEP 4 - Install Camera/Hotshoe in Housing -
6. Slide the Hotshoe into the top camera mount until it stops. Hotshoe must
be all the way forward in the camera mount to assure a good electrical
connection with a strobe, Diagram C, below.
Make sure hotshoe cord does not interfere with controls or the housing
back when closing the housing.
Hotshoe - push all
the way forward
into camera mount
Push Camera and
Mounting Tray all the
way forward into
Mounting Plate
Diagram C
Mounting Plate
continued
Port Base
Port Base O-ring
11