Preparation - Ikelite 6950.52 Instruction Manual

Underwater ttl housing for olympus om-d e-m5 mark ii

Hide thumbs Also See for 6950.52:

Table of Contents

Photo Tips ..................................................................P. 23

Customer Support ......................................................P. 26

Limited Warranty ........................................................P. 27

Returning Products for Service ................................P. 27

Product Registration ..................................................Back Page

Preparation

This product has been water pressure tested at the factory and is depth

rated to 200 ft (60m). Thoroughly inspect and immerse the empty

housing completely in water before installing a camera. If any fogging

occurs or droplets of water enter the housing, do not install a camera.

Clean the main housing o-ring and retest to make sure that it is

watertight. Refer to the Troubleshooting section, page 24.

Please read your camera manual thoroughly to have a full

understanding of each camera function.

If you are new to underwater photography, be sure to read the Photo

Tips section, page 23.

continued

........................................................P. 24 - 26

Table of Contents

6950.51 6950.10