Initialization Of B, D, E, F; Initialization Of D Page Data; Initializing D; Modification Of D - Sony DSC-P30 Service Manual

Table of Contents

Advertisement

1-2.
INITIALIZATION OF B, D, E, F, 7, 9 PAGE DATA
1-2-1.

Initialization of D Page Data

1. Initializing D Page Data
Note: If the D page data has been initialized, the following
adjustments need to be performed again.
1) Modification of D page data
2) LCD system adjustments
Adjusting page
Adjusting Address
Initializing Method:
Order Page Address Data
1
0
01
01
2
4
03
3
4
00
2D
4
4
01
2D
5
4
02
6
2. Modification of D Page Data
If the D page data has been initialized, change the data of the "Fixed
data-2" address shown in the following table by manual input.
Modifying Method:
1) Before changing the data, select page: 0, address: 01, and set
data: 01.
2) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
Note: If copy the data built in the different model, the
camcorder may not operate.
3) When changing the data, press the PAUSE button of the
adjusting remote commander each time when setting new data
to write the data in the non-volatile memory.
4) Check that the data of adjustment addresses is the initial value.
If not, change the data to the initial value.
Processing after Completing Modification of D Page Data:
1) Press the RESET switch at the bottom of the set using a thin
and long pin.
D
10 to EF
Procedure
0D (P30), 0C (P50)
Press PAUSE button.
Check the data changes to "01".
Perform "Modification of D
page Data".
3. D Page Table
Note 1: Fixed data-1: Initialized data.
(Refer to "1. Initializing of D Page Data")
Note 2: Fixed data-2: Modified data.
(Refer to "2. Modification of D Page Data")
Address Initial value
00 to 0F
10
00
11 to 4E
4F
50 to C5
C6
5A
C7
61
C8 to CF
D0
76
D1
77
D2
AA
D3
74
D4
BE
D5
89
D6
7F
D7
68
D8
5E
D9 to DC
DD
80
DE
DF to EF
5-8
Remark
Test mode
Fixed data-1 (Initialized data)
Fixed data-2
Fixed data-1 (Initialized data)
Video sync level adj.
Video burst level adj.
Fixed data-1 (Initialized data)
Bright adj.
Color adj.
White balance adj.
Contrast adj.
Black limit adj.
VG center adj.
VCO adj. (NTSC)
V-COM adj.
Fixed data-1 (Initialized data)
VCO adj. (PAL)
Fixed data-2
Fixed data-1 (Initialized data)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dsc-p50

Table of Contents