Delete A User Account; Enable The Syslog Server - NETGEAR WAC720 User Manual

ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
The password is reset to the default password, which is password.
7. Click the Apply button.
Your settings are saved.
Note: If you want to modify a password, delete the user account, and then
recreate the user account with the password of your choice.

Delete a User Account


To delete a user account:
1. Open a web browser from a computer that is connected to the same network as the
access point or to the access point directly through an Ethernet cable.
For more information, see
2. In the address bar, enter the IP address of the access point.
A login window opens.
3. Enter the user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
4. Select Configuration > System > Advanced > User Accounts.
The User Accounts page displays.
5. In the Update User Accounts section, select a user from the Existing Users menu.
6. Click the Delete button.
7. Click the Apply button.
Your settings are saved.

Enable the Syslog Server

You can enable the syslog option if your LAN includes a syslog server. If syslog is enabled,
the access point sends its syslog files to the syslog server.

To enable a syslog server:
1. Open a web browser from a computer that is connected to the same network as the
access point or to the access point directly through an Ethernet cable.
For more information, see
2. In the address bar, enter the IP address of the access point.
A login window opens.
Log In to the Access Point
Log In to the Access Point
Management and Monitoring
69
on page 15.
on page 15.