Multitech CommPlete MR9600 User Manual page 54

MR9600 User Guide
[SecurityFile]
NumberOfFile=0
[NetWorkDefaults]
Default Gateway = 192.168.10.151
--More--
mount
Parameter: Drive Specifier
Description: Make the specified drive available to the operating system.
Security: Supervisor
Example:
[01] [No Drive Mounted] # mount a:
[02] A:\ #
oc, oosclear, oosclr
Parameter: Device
Description: Puts the specified devices in service by clearing the Out Of Service flag.
Security: Operator
Limitations: There is no effect if the Out of Service flag is not set for the modems.
Example:
[0] A:\MMM # oc 1a
[1] A:\MMM #
online
Parameter: Device
Description: Goes online in command mode with a device to check configuration information and
firmware version information. This does not create a fully functional terminal, but is available to set and
check configuration information.
Security: Operator
Example:
[0] A:\ # online 6a:6c
==== Online with device: Slot 06 Device A
==== type "<esc> and ?" to display help information ====
<esc>?
+--------------------------------------+
! <esc> again to exit terminal mode
! b
! c
! n
! 1
! 2
! 3
! 4
! ?
+--------------------------------------+
atl5
B1 E1 M1 Q0 R0 V1 X4 &E1 &E4 &E6 &E8 &E10 &E13 &E15 %C0 #C1 *C0
&C1 *H0
$MB33600 $SB115200 $BA0 &W1
OK
<esc>n
46
to move back in device list
to clear the screen
to move forward in device list
send stored command 1 to device
send stored command 2 to device
send stored command 3 to device
send stored command 4 to device
to display this help menu
====
!
!
!
!
!
!
!
!
!
CommPlete Communications Server