Table of Contents
Advertisement
MR9600 User Guide
Introduction
This manual describes the field installation and configuration of a Multi-Tech MR9600 Controller
(henceforth, MR9600) into a CommPlete Communications Server CC9600 chassis. This manual also
contains a reference guide to the commands that are used to configure and control the MR9600.
Product Description
The MR9600 is the system controller module for the CommPlete Communications Server. It contains a
built-in Web, FTP, and Telnet server, an embedded SNMP agent, and an Ethernet concentrator module. Its
complete management capabilities allow the CommPlete Communications Server and its segments to be
managed remotely across any TCP/IP network.
LED Indicators
The MR9600 front panel contains the following LED indicators.
• Card status LEDs 1–16
• Ethernet status LEDs 1–4
• Ethernet concentrator LEDs
Figure 1. MR9600 Controller front panel.
Card Status LEDs
The lower part of the MR9600's front panel contains 16 two-color LED indicators, one for each card slot in
the CC9600 chassis. The slots are numbered 1 through 16 from left to right. The LEDs indicate the state of
2
CommPlete Communications Server
Advertisement
Table of Contents
