Multitech CommPlete MR9600 User Manual page 32

MR9600 User Guide
se, setenviron
setgateway
setip
setpollingoff
setpollingon
setrasostype
setreadcommunity
setsendtrap
setsubnet
settrap
setwritecommunity
t1cfg
t1debug
t1setup
t1status
time
update
uptime
version, ver
File
Command Name
cat
cd, chdir
copy, cp
del, delete
dir
download
ls
md, mkdir
24
None Controller configuration utility (a menu driven system
used to set global defaults and configure system
devices)
IP Address Configure the gateway address
IP Address Configure the IP address
Device Disables the controller generated polling to specified
device
Device Re-enables polling between controller and specified
device
Device Lets the controller know what operating system is
loaded on each segment
None Change the Read community settings
On/Off Changes the status of sending traps.
IP Address Mask Configure the subnet mask
IP Address Configured the trap address
None Change the Write community settings
Device Sends stored configuration data to a T1 device
Device Displays status of AB Signaling bits for both the
transmit and receive directions of each DSO channel
for the specified T1 device within the CommPlete
Device Configures a T1 device
Device Displays the status of a T1 device
None Prompts you for current time
Pathname Updates firmware of the controller, T1 cards, or
Device modems.
None Displays date and time since the last boot
None Displays the version number and release date of the
CC9600 Controller's Operating System
Parameters Description
Pathname Display the contents of an ASCII text file
Pathname Change to the specified directory
Pathname1 Copy a file from Pathname1 to Pathname2
Pathname2
Pathname Delete a file
Pathname Display the contents of a directory
Pathname Download a file from the MR9600 controller
Pathname Display the contents of a directory
Pathname Make directory
CommPlete Communications Server