Description of functions
By pressing the button Accounts, you will display a window for changing login data.
By pressing Log out, you will log out of the web interface eLAN-RF-Wi-003.
By pressing the button Save settings, you can save the current settings of your eLAN-
RF-Wi-003 including network settings.
By pressing the button Load settings, you can restore your stored settings, which
you have already stored in your PC (the file has the extension .bin).
The button Settings is to configure network settings that you can change any time
based on your network.
If you leave DHCP ON selected by default, the eLAN-RF-Wi-003 always assigns you an
IP address in the range set by default (192.168.1.x).
The IP address of eLAN-RF-Wi-003 can be changed, but in the same range.
If you have your own home Wi-Fi network, switch off the DHCP server by assigning
DHCP OFF and set the IP of the eLAN-RF in the same subnet mask as you have at
home. Set the default gateway the same as your network. Press Save to store the
settings. If you can connect the eLAN-RF-Wi-003 by ethernet cable into your home
network.
Webové rozhraní / rev.3
eLAN-RF-Wi-003
7 of 15
Page