Advertisement
3. Type – here you select the type of room or type of icon that you will then display
after entering the floorplan on the desktop.
4. Floorplan – here select the floorplan (image) that you added before in the tab
Floorplans.
By pressing (–) you can delete any selected room.
By pressing (X) you can remove all added rooms.
Panel Scenes – Here any scenes are created based on user requirements.
It is possible to create scenes only after you add rooms and actuators.
Button (+) - add a new scene:
1. ID* - name of room (not required).
2. Label - enter any name of the scene (you can use diacritical marks and spaces in
between...).
1. Actions - (+) – add an RF element, (–) delete the selected element, (X) – delete all
RF elements.
When adding an actuator, its function-action is set (switching, dimming, etc.).
Webové rozhraní / rev.3
eLAN-RF-Wi-003
12 of 15
Page
Advertisement
