Advertisement
The button Update firmware is used to update the firmware (FW).
When updating the eLAN-RF-Wi-003, proceed according to the following instructions:
1 Download the latest firmware version from the website:
stazeni/software/inels-rf-control/
2 Click on the button Update firmware, select the downloaded file (the update file must
always include the extension *.bin ), and click on it. After confirming by pressing OK, the
update of your firmware in your eLAN-RF-Wi-003 automatically starts.
Note: do not turn off device or use the Reset button when updating the firmware. the eLAN-
RF-Wi-003 restarts after updating. After the firmware update, all settings will remain
preserved. This means that the set IP, login data, visualization panel will remain the same as
with the SW version prior to the update.
Button Reboot – to restart the device eLAN-RF-Wi-003.
Panel Rooms displays created rooms.
By pressing the button (+), you can add a new room:
1. ID *of the room "optional data", if you do not enter it - a number is automatically
generated. Here you can only use the characters [0-9A-Za-z_-].
2. Label gives an arbitrary name to the room (you can use diacritical marks, gaps and
others...)
Webové rozhraní / rev.3
eLAN-RF-Wi-003
http://www.elkoep.cz/ke-
11 of 15
Page
Advertisement
