Download
Share
Print this page
  1. Manuals
  2. Brands
  3. iNels Manuals
  4. Control Unit
  5. eLAN-RF-Wi-003
  6. Installation manual

iNels eLAN-RF-Wi-003 Installation Manual

Smart rf box
Hide thumbs Also See for eLAN-RF-Wi-003:

Advertisement

Quick Links

Download this manual
eLAN-RF-Wi-003
1 of 15
Page
Webové rozhraní / rev.3

Advertisement

loading

Related Manuals for iNels eLAN-RF-Wi-003

Summary of Contents for iNels eLAN-RF-Wi-003

  • Page 1 1 of 15 Page Webové rozhraní / rev.3...

  • Page 2: Table Of Contents

    Introduction ............................. 3 Logging in to the web interface eLAN-RF-Wi-003 ................4 Settings ............................5 Description of configuration panel ...................... 6 Description of functions ........................7 Adding RF actuators to the floorplan ....................15 Controlling RF units ........................... 15 Starting up scenes ..........................

  • Page 3: Introduction

    • Thanks to bi-directional communication, it visualizes the current status of individual units. • The smart RF box eLAN-RF-Wi-003 is connected to the home network (router) via the Wi-Fi network and communicates with your smart phone. Connection to the home network is also possible via network LAN cable..

  • Page 4: Logging In To The Web Interface Elan-Rf-Wi-003

    2. Logging in to the web interface eLAN-RF-Wi-003   After connecting the eLAN-RF-Wi-003 to the power source, after around 1 minute you will see displayed in the list of available WiFi networks the name: ELAN-RF-  Connect to the network by entering the password: 00000000 ...

  • Page 5: Settings

     Confirm the log in by pressing: Login. Note: Perform RESET of the eLAN-RF-Wi-003 by a long press of the button on the front panel of the device until the yellow LED begins flashing. eLAN is restarted at the moment the LED stops flashing.

  • Page 6: Description Of Configuration Panel

    Description of configuration panel 6 of 15 Page Webové rozhraní / rev.3...

  • Page 7: Description Of Functions

     By pressing the button Accounts, you will display a window for changing login data.  By pressing Log out, you will log out of the web interface eLAN-RF-Wi-003.  By pressing the button Save settings, you can save the current settings of your eLAN- RF-Wi-003 including network settings.
  • Page 8 Note: If you change the IP address, to log into the eLAN-RF-Wi-003 you must use the new IP address. If the new IP address that you entered is not in the same subnetwork, the connection will not work if settings are not changed in the connected device (PC, iMM Client) to the same subnetwork.
  • Page 9 Repeater The Repeater function is an independent function of eLAN-RF-Wi-003 and is used to increase range between RF controllers (system elements) and RF elements. Use: an eLAN-RF-Wi-003 device configured for a repeater can only be connected to the supply voltage, and it will then function just the same as the RFRP-20. This means if it receives a command from the RF controller or RF detector, it resends it to a designated RF element and vice-versa.
  • Page 10 Time of eLAN-RF-Wi-003 is automatically set from NTP server. If your eLAN-RF-Wi-003 is not connected to internet network, then time is always set to 12:00 AM, the current day is set manually with button Manual. During power failure, time information is erased from eLAN memory.
  • Page 11  The button Update firmware is used to update the firmware (FW). When updating the eLAN-RF-Wi-003, proceed according to the following instructions: 1 Download the latest firmware version from the website: http://www.elkoep.cz/ke- stazeni/software/inels-rf-control/ 2 Click on the button Update firmware, select the downloaded file (the update file must always include the extension *.bin ), and click on it.
  • Page 12 3. Type – here you select the type of room or type of icon that you will then display after entering the floorplan on the desktop. 4. Floorplan – here select the floorplan (image) that you added before in the tab Floorplans.
  • Page 13 After adding all actuators and their required functions, click on Create, thereby saving the entire scene.  The panel Devices is used for adding RF actuators to the eLAN-RF-Wi-003. Button (+) - add a new RF element: 1. Product Type – select RF element 2.
  • Page 14 1. Select the required image for the floorplan (stored in your PC). 2. ID – enter the name of the floorplan. Confirm by pressing OK. The number of floorplans is limited by the memory size of the eLAN-RF-Wi-003. Find out the memory status in the top of the configuration panel.

  • Page 15: Adding Rf Actuators To The Floorplan

    Adding RF actuators to the floorplan Click on the room in the Rooms Types panel into which you want to add the required RF actuator, and a floorplan will then appear on the desktop (not necessary however - a white space may remain as the floorplan), double-click anywhere on the desktop, and the addition of RF actors will be activated by a red boundary, and the Devices panel will open.