Related Manuals for iNels RF KEY-40/W
Summary of Contents for iNels RF KEY-40/W
- Page 1 WIRELESS LIGHT DIMMER KEY FOB Combination of iNELS switching element for universal use. It can be used to control electrical appliances, lights, sockets, garage doors, etc.
- Page 2 The individual elements in the iNELS set are paired and their functions are preset. iNELS kit with key fob enables the basic function of controlling electrical appliances - ON / OFF. The appliances can be controlled independently by a key fob.
- Page 3 Detailed manual Controller – key fob RF KEY-40/W, RF KEY-40/B RF KEY 40/B – key fob , black RF KEY 40/W – key fob , white RF KEY 40 Characteristics • Key fob-sized remote control - used to control, lights, gate, garage door, shitters, etc.
- Page 4 EN 60669, EN 300 220, EN 301489, Related standards: No 426/2000 Coll. Attention When you install iNELS RF Control system, you have to keep a minimal distance of 1 cm (0.4“) between each unit. Between the individual commands must be an interval of at least 1s.
-
Page 5: Switch Off
• The universal built-in dimmer is used to regulate light sources. • They can be combined with detectors, controllers, iNELS RF Control or system components. • 7 light functions - smooth increase or decrease with time setting 2s-30 min. + additional function SWITCH OFF •... - Page 6 Technical parametres RFDEL-71B-SL Supply voltage: 230 V AC / 50 Hz Apparent power: 5 VA Dissipated power: 0.5 W Supply voltage tolerance: +10/ -15 % Connection: 4 - wire, with NEUTRAL Dimmed load: R, L, C, LED, ESL Output: Contactless: 2 x MOSFET Load capacity: 300 W *...
- Page 7 Compatibility The device can be combined with all system components, controls and devices of iNELS RF Control and iNELS RF Control The detector can be assigned an iNELS RF Control (RFIO ) communication protocol. Connection LED, ESL, R coil transformer...
- Page 8 Warning Instruction manual is designated for mounting and also for the usage of the device. It is always a part of its pac- king. Installation and connection can be carried out only by a person with adequate professional qualifi cation with understanding this instruction manual and functions of the device, and while observing all valid regulations.