Important Safety Instructions - Pacific Proteus 26 Operating & Maintenance Instructions

Automatic
Hide thumbs Also See for Proteus 26:
Table of Contents

Advertisement

READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS BEFORE OPERATING
THIS MACHINE!
WARNING: To reduce the risk of fire, electric shock or injury:
1. You must have training in the operation of the machine before using it. READ THE
INSTRUCTION BOOK. If you do not understand any instruction, ask your supervisor.
2. Make sure all labels, decals, warnings, cautions and instructions are fastened to the machine.
3. Read the labels carefully on the machine. Do not cover them for any reason and replace
them if damaged.
4. Do not operate this machine unless it is completely assembled, inspect the machine carefully
before operation.
5. Pay close attention to other people and especially children while operating this machine.
6. Be a careful driver, do not strike shelving or scaffolding, especially where there is a danger
of falling objects.
7. Machines can cause an explosion when operated near flammable materials and vapors. Do
not use this machine with or near fuels, grain dust, solvents, thinners, or other flammable
materials.
8. In case of fire, use a powder extinguisher. Do not use water.
9. Do not use this machine as a means of transport.
10. Do not use acid solutions that could damage the machine.
11. Adjust your speed to the conditions of the floor.
12. Do not turn the machine on a ramp. Do not stop and leave the machine on a ramp or incline.
13. When the machine is parked, take out the key and set the parking brake.
14. During any maintenance operation disconnect the power supply from the machine.
15. Lead acid batteries generate gases that can cause an explosion. Read the instruction manual
supplied with the battery charger. Keep sparks and flames away from batteries.
NO SMOKING. Charge the batteries only in an area with good ventilation.
16. Do not use a charger if the power cord is damaged.
17. Always wear eye protection and protective clothing when working near batteries. Remove
all jewelry. Do not put tools or other metal across the battery terminals, or the tops of the
batteries.
18. Maintenance and repairs must be performed by authorized Service Centers only. Make
adjustments according to the specifications given in the service manual for this machine.
19. Keep the electrical parts of the machine dry. Do not wash the machine with direct water jets
or high pressure, nor with corrosive material. For storage, keep the machine in a dry build-
ing.
20. Water solutions or cleaning materials used with this type of machine can leave wet areas
on the floor surface. These areas can cause a dangerous condition for the operator or other
persons. Always put CAUTION signs near the area you are cleaning.
21. Do not reach under shrouds with fingers, hands, or toes when machine is running.

IMPORTANT SAFETY INSTRUCTIONS

5

Advertisement

Table of Contents
loading

Table of Contents